基于UG环境下齿轮库系统建立.pdfVIP

第29 卷第4 期 机械设计与研究 Vol. 29 No.4 2013 年8 月 Machine Desígn and Research Aug. ,2013 文章编号:1∞6-2343 (2013 )04 -054-03 基于 UG 坏境下齿轮库系统建立 宋娓娓1 ，汪洪峰1 气汪建利1 ，左敦稳2 ，王珉2 ，叶欢3 (1四黄山学院机电与信息工程学院，安徽黄山 245041 .E-mail: sww_2011@163.com; 2. 南京航空航天大学机电学院，南京 210016;3. 安徽工程大学机械与汽车工程学院，安徽湖 241∞0) 摘 要:以齿轮为研究对象，分析其齿廓特点，实现了齿轮模型的完全参数化。综合运用编程法和电子表 格法建库的优点，建立了一个简单的齿轮零件库，极犬地方便了齿轮零件的调用，提高了设计效率。通过对设 计参数的读取，完成了齿轮模型的参数驱动。建立了齿轮库系统，其能快速、敏捷化设计齿轮零件。 关键词:齿轮;UC;设计;系统;模型 中圄分类号: 1凹91 文献标识码:A The Establishment of the Gear-base System Under UG Environment J 1 2 J 2 2 3 Song Weiwei , Wang Hongfeng . , Wang Jianli , Zuo Dunwen , Wang Min , Ye Huan (1. School of Mechanìcal Electronìc Infonnatìon Engineering , Huangshan University , Anhui Huangshan 245041 , Chína; 2. College of Mechanical and Electrical Engineering , Nanjing Univer百ity of Aeronautics and Astronautics , Jiangsu Nanjing 21∞16 ， China 3. College of Machinery and Automobile Engineering , Anhui Polytechnic University , Wuhu 241仪刃， China) Abstract: Takìng the gear as the research object , ìts profile characteristics was analyzed and the gear model parameterization was completely realized. Comprahensívely using the advantages of the programmìng method and the electronic form method , the símple gear parts base was buílt. It ìs greatly convenient for callíng the gear parts , and ít also improved the design efficiency.ηle parameter-drive of the gear model was completed by readíng the desígn p缸ameters. 咀ís gear-base system could quíckly and agílely desígn gear parts. Ke