AT89C51RC 中文版说明.pdf

Features ® • Compatible with MCS -51 Products • 32K Bytes of Reprogrammable Flash Memory • Endurance: 10,000 Write/Erase Cycles • 4V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 512 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters 8-bit • Eight Interrupt Sources Microcontroller • Programmable Serial Channel • Low-power Idle and Power-down Modes with 32K Bytes • Interrupt Recovery from Power-down Mode • Hardware Watchdog Timer Flash • Dual Data Pointer • Power-off Flag • Green (Pb/Halide-free) Packaging Option AT89C51RC 1. Description The AT89C51RC is a low-power, high-performance CMOS 8-bit microcontroller with 32K bytes of Flash programmable read-only memory and 512 bytes of RAM. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 and 80C52 instruction set and pinout. The on-chip Flash allows the program memory to be user programmed by a conventional nonvolatile memory programmer. A total of 512 bytes of internal RAM are available in the AT89C51RC. The 256-byte expanded internal RAM is accessed via MOVX instructions after clearing bit 1 in the SFR located at address 8EH. The other 256-byte RAM segment is accessed the same way as the Atmel AT89-series and other 8052-compatible products. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C51RC is a powerful microcomputer which pro- vides a highly-flexible and cost-effective solution to many embedded control applications. The AT89C