长波红外高灵敏度信息采集系统设计研究.pdfVIP

第39 卷 第5 期 红 外 技 术 Vol.39 No.5 2017 年5 月 Infrared Technology May 2017 长波红外高灵敏度信息采集系统设计 1,2 1 张 龙 ，董 峰 （1.上海技术物理研究所 中国科学院红外探测与成像技术重点实验室，上海 200083 ； 2. 中国科学院大学，北京 100049 ） 摘要：本文针对特定长波红外焦平面（288 ×384 像元）探测器，选用低噪直流电源和低压差线性稳压 器组合，实现了该红外焦平面模拟和数字驱动电路。分析提升长波红外探测灵敏度的关键要点，设计 了高灵敏度信息采集电路。该红外成像系统具有高帧频、高灵敏度的优点。实验室测试得到该长波红 外探测系统噪声等效温差（NETD ）在300 K 下优于 30 mK 。 关键词：红外探测；驱动电路；积分时间；灵敏度 中图分类号：TN215 文献标识码：A 文章编号：1001-8891(2017)05-0409-05 Long-wave Infrared High Sensitivity Information Acquisition System ZHANG Long1,2，DONG Feng1 (1. Key Laboratory of Infrared detection and Imaging technology, Shanghai Institute of Technical Physics, Chinese Academy of Science, Shanghai 200083, China; 2. University of Chinese Academy of Sciences, Beijing 100049, China) Abstract ：The analog and digital drive circuit for infrared focal plane is designed by using the low noise DC power supply and the low voltage difference linear voltage regulator. Based on the analysis of the key points of the long wave infrared detection sensitivity, a high sensitivity information acquisition circuit is designed. The infrared imaging system has high frame rate and high sensitivity. The noise equivalent temperature difference (NETD) of the long wave infrared detection system is better than 30 mK at 300 K by the laboratory test. Key words ：infrared detection，drive circuit，integration time，sensitivity 电路设计中充分考虑提高灵敏度的原理和方法。实验 0 引言