Energy and Cost Analysis in Pulp and Paper （在纸浆和造纸能源和成本分析）.pdf

International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 5 (2013), pp. 619-624 © International Research Publication House Energy and Cost Analysis in Pulp and Paper Industry by Auditing Techniques: A Case Study 1 2 3 Harsh Harit , Pardeep Gupta and S. C. Gupta 1Mechanical Engineering, JMIT Radaur, Yamunanagar, Haryana, INDIA. 2, 3 Mechanical Engineering SLIET Longowal Sangrur, Punjab, INDIA, NIT Kurukshetra, Kurukshetra, Haryana, INDIA. Abstract Men’s quest for comfort and luxury has increased the demand for energy. So, the energy conservation has become essential to overcome the mounting problems of energy crisis. Efficient energy management, conservation of resources, carbon capture should be considered to solve out energy and environmental issues. In last 25 years, the world energy demand has increased by 70% and still increasing at a higher rate annually. Reduction of energy consumption and environmental issues can be achieved through adoption of environment friendly technologies such as massive plantation, rain water harvesting, use of treated effluent for irrigation and by auditing technologies etc. In the present case study of a pulp and paper industry, the energy auditing for Pumps, Barometric leg of washers, Agitator, Coal fired boilers, Dryer head of steam cylinder has been carried out using energy Level- I (The Walk Through) and Level- II (Standard) auditing techniques. It has been observed in case of pumps, that 50% energy and cost can be saved by replacing the 60 HP