Finite Element Analysis of Boiler Shell with （锅炉锅筒的有限元分析）.pdf

International Journal of Research in Management, Science Technology (E -ISSN: 2321-3264) Vol. 1; No. 2, December 2013 Available at Static Structural Analysis of Boiler Shell with Riveted Joints Using ANSYS Gurpreet Singh#1 , Vinod Kumar Mittal*2, Surjit Angra#3 #P G Student, Mechanical Engineering Department, NIT Kurukshetra , India #Professor, Mechanical Engineering Department NIT Kurukshetra , India 1gurpreet.makkar84@ 3angrasurjit@ * Associate Professor, Mechanical Engineering Department NIT Kurukshetra , India 2 mit_vkum@ Abstract─ This paper deals with the stress analysis of boiler shell circumferential joints are mode as lap joints. Farah with riveted joints. By using finite element method, a stress analysis has been carried out under the application of pressure at et al. developed software for designing and the inner surface of boiler shell. Von-Mises stresses and analyzing rivets of boiler shells as an example to maximum shear stresses are found. These stresses are compared use rivets in industry [1]. Until recently the primary with analytical results. Using the two materials, structural steel analysis m