GSnap Manual GVST（GSnap手动GVST）.pdfVIP

GSnap Manual Welcome to GSnap GSnap is an auto-tune effect. It can be used subtly to correct the pitch of a vocal, or, with more extreme settings, to create a robot-voice effect. It requires a monophonic input signal to operate. Installation 1. All GVST plug-ins come compressed in a ZIP file, so the first step is to extract the files from the ZIP file. 2. Once extracted, you should have one or more DLL files, these are the plug-in files. 3. You need to copy the plug-in files to the appropriate folder for your host program. 4. In most cases, you will need either to restart the host program or re-scan the plug-in folder in order for newly-installed plug-ins to appear. Hints • Try GSnap with non-vocal material for interesting effects. • GSnaps effect is more useful with simple material. Complex material with rapid note changes may require several hours of dedicated MIDI programming to deal with, and may still end up sounding less than realistic. • Use the automatic correction with Forced Key to help approximate that famous vocal effect. • Automate switching between Fixed and MIDI mode for ultimate control: allow GSnap to do its thing automatically for much of the material, and then take over for passages or notes that need specific work. • Try feeding GSnap some MIDI information in real-time during a vocal passage. You may find the results even more interesting than that other vocal effect! Interface The GUI features a set of 12 knobs which control all of the plug-ins parameters. Each has its function clearly labelled above, and features a user-editable readout below. Additionally, twelve switches next to the pitch data view correspond to the twelve semitones of a full octave in the Western chromatic scale, and are used to supplement the fixed mode of GSnap. Two further switches allow the user to select between fixed or