Guide to the Selection Use of Residual Current （剩余电流的选择使用指南）.pdf

Guide to the Selection Use of Residual Current Devices ET214:2005 Edition 1 Electro-Technical Council of Ireland Limited Published by the Electro-Technical Council of Ireland Limited Date of Publication: 2005-02-11 Reissued 2006-01-26 with editorial correction to page (ii) © 2005: The Electro-Technical Council of Ireland Limited. No part of this publication may be reproduced either mechanically of electronically or by photocopying without the written permission of the publisher. Electro-Technical Council of Ireland Limited, Unit H12, Centrepoint Business Park, Oak Road, Dublin 12. Telephone: (01) 429 0088 Fax: (01) 429 0090 E-mail: admin@etci.ie Website: http://www.etci.ie Whilst every effort has been made to ensure that this Guide provides accurate and expert guidance, it is impossible to predict all the circumstances in which it may be used. Accordingly the authors, the publishers – ETCI, its committees and members shall not be liable to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by omissions, content or any error contained in this Guide. Contents Section 1 Introduction, Objective Scope 1.1 Introduction 1.2 Objective 1.3 Scope 1.4 Definition Principle of Operation Section 2 Regulatory Requirements 2.1 Regulatory Requirements 2.2 RCD Product Standards 2.3 Installation Rules 2.4 Assembly Requirements Section 3 RCD Product Types 3.1 Product Names/Types 3.2 RCD Technology 3.3 Supply Voltage Response 3.4 Values of Rated Residual Operating Current 3.5