July 2010 Edition 72 Schaeffler（2010年7月版72舍弗勒）.pdfVIP

July 2010 Edition 72 Corrosion-resistant ELGES® spherical plain bearings Up to now, spherical plain bearing applications prone to corrosion required considerable outlay in terms of corrosion protection that can easily exceed the actual purchase costs of a standard bearing. This can involve the materials, e.g. corrosion-resistant steels, seals or also permanent service and maintenance. For these applications, we are now offering new corrosion protection for maintenance-free ELGES® spherical plain bearings with ELGOGLIDE® : Outer rings with zinc nickel coating Inner rings with an improved hard chrome coating You can benefit in several ways: Longer life compared with solutions requiring maintenance No outlay for service and maintenance Increase in productivity due to freedom from maintenance High-performance corrosion protection due to the coating Cost-effective solutions since the coating is applied to regular steel The solution is available immediately for special bearings and the introduction of a catalog variant has been planned. We will inform you about this in due time in the usual manner. Your contact in the Schaeffler Sales team will be only too happy to assist you in selecting the appropriate corrosion protection for your application. SI 72 – July 2010 © Schaeffler Technologies GmbH Co. KG Page 1 of 5 Split plummer block housings SNV – Technical Product Information has been revised Technical Product Information 175 “Split plummer block housings SNV. For shaft diameters 20 mm to 160 mm and ¾ to 5 ½ inches” has been completely revised and now includes new series SNV052-F to SNV340-F. The TPI provides a comprehensive overview of all available SNV housings and contains detailed information about materials, bearing seating, seals and covers, lubrication, assembly and ordering. FAG series SNV split housings are designed according to th