SFP Copper Transceiver Greatway Tech（SFP铜收发宏道科技）.pdf

Greatway Technology, connecting the world 1000BASE-T SFP Copper Transceiver SFP Copper Transceiver Features: † Up to 1.25Gb/s bi-directional data links † Hot-pluggable SFP footprint † Extended case temperature range (0 C to +85 C ) † Fully metallic enclosure for low EMI † Low power dissipation † Compact RJ-45 connector assembly † Detailed product information in EEPROM † +3.3V single power supply † Access to physical layer IC via 2-wire serial bus † 10/ 100/ 1000 BASE-T operation in host systems with SGMII interface † Compliant with SFP MSA † Compliant with IEEE Std 802.3TM-2002 † Compliant with FCC 47 CFR Part 15, Class B Applications: † 1.25 Gigabit Ethernet over Cat 5 cable † Switch/Router to Switch/Router Link † High speed I/O for file severs Description: Greatway’s GTSFP-24-111X 10000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The GTSFP-24-111X supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The GTSFP-24-111X provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh. SFP to Host Connector Pin Out Pin Signal name Description MSA Notes 1 VEET Transmitter ground (common with receiver ground) 2 TFAULT Transmitter Fault. Not supported Note 1 3 TDIS Tr