Surface Preparation Standards for Steel …（表面处理标准钢u2026）.pdfVIP

Surface Preparation Standards for Steel Substrates— A Critical Review By A.W. Momber and W.D. Greverath, Mühlhan Surface Protection International GmbH, Hamburg spects of surface quality are becoming tions should be addressed. increasingly important. Not only own- • What parameters should be considered in the standard? Aers and managers in the marine indus- • What are the critical values for these parameters? t r y, but also paint manufacturers, have learned that a high • How can the parameters be evaluated or, respectively, s u r face quality is a major prerequisite for reliable perfo r- measured? mance of coating systems. However, it depends to a large An answer to the first question is delivered by ISO 8502, extent on the contracting companies if and how an appropri- which states that, “the behaviour of protective coating sys- ate surface quality can be guaranteed, and if standards can be tems is affected mainly by the condition of the substrate met. Until now, contractors depended on standards issued immediately before the coating system is applied. This either by national regulatory organisations (such as SSPC, behaviour is basically determined by the following. NACE, or STG) or by paint manu- • Rust and mill scale facturers. Contractors did not issue • Surface contaminants, including their own standards, which poses salts, dust, oils and greases problems when new innovative