空压机技术（Air compressor technology）.docVIP

空压机技术（Air compressor technology） Air compressor technology Q A Q: what is the minimum pressure valve for? Answer: Two: 1) the minimum pressure valve is the role of a buffer, when the machine is in the moment of loading, we assume that the emissions into the atmosphere, high pressure generated and separated inside the machine before the separation of the difference will all add in the separator, causing damage to the core separator; 2) machine lubricating oil by machine the pressure difference, no additional auxiliary oil pump, when the machine is in the idle state, still need to maintain a certain pressure oil circulation, so the intake valve is relatively closed, and the minimum pressure valve to prevent the leakage of pressure so that the lubricating oil circulation. Q: what is the best device on the market for the mixing of gases of the same kind (pressure)? Answer: the same gas mixing pressure after different, should be self regulating unified pressure, such as those used in the pressure everywhere in different needs, assuming mounted on the pressure regulator, I think you should be able to meet demand. Q: what is the difference between single screw compressor and twin screw compressor? Whats the difference between energy saving and rotor bearing life? Answer: single screw and double screw from the structure for manufacturing process of double screw than single screw complex, and life and the work efficiency of the difference is not great, but the current domestic manufacturing technology of single screw twin-screw not mature. The main problem is to solve the transmission and sealing, that is to say, life and maintenance, single screw less. Q: I have an air compressor spare parts, due to reasons have not boot, this two days a boot failure: to boot, cm-pvs end, normal loading, fast start and stop display back, what is the reason? Answer: This is not used for a long time, moisture can not be ruled out in time, the minimum pressure valve and pipe valve and other r