在开关设备应用中高效驱动电磁线圈-德州仪器.pdfVIP

Texas Instruments Incorporated Power Management Driving solenoid coils efficiently 在开关设备应用中有效驱动螺线管线圈 in switchgear applications 作者： ，德州仪器 高级模拟应用工程师 Sanjay Pithadia (TI) By Sanjay Pithadia Senior Analog Applications Engineer 引言 Introduction 图 螺线管工作原理 Figure 1. Working of a solenoid 1 A primary objective of all power systems is to maintain a 所有电源系统的主要目的都是维持高水平的持续供电 very high level of continuity of service and, when intolera- 能力 并在出现不可承受状态时 最小化其影响范围 Induced Magnetic Field Inside Coil ， ， ble conditions occur, to minimize their extent and the out- Rod Moves In age time. Loss of power, voltage dips, overcurrents, and 和断电时间 功率损耗 电压下降 过电流和过压总 。 、 、 overvoltages will occur because it is impossible to avoid 会出现 因为我们无法避免自然事件 物理事故 设 ， 、 、 S N the consequences of natural events, physical accidents, 备故障或者人为误操作 组合使用一些器件 用于 。 ， equipment failure, or misoperation owing to human error. 保护电气设备免受这些事件的损害 也即 接电装 ， “ A combination of devices used to protect electrical equip- ment from these events is known as switchgear. Solenoids 置”。螺线管和继电器是所有接电装置中不可或缺的 Current and relays are integral parts of any switchgear equipment, 组成部分 它们通过线圈通电和接触 连接 断开受 。 ， / as they connect/disconnect the mains to/from the protected 保护设备的电源 本文为您介绍继电器 电流接触 。