一种降低直流输电换相失败概率的控制方法-电网技术.pdfVIP

  • 5
  • 0
  • 约 7页
  • 2017-09-03 发布于天津
  • 举报

一种降低直流输电换相失败概率的控制方法-电网技术.pdf

一种降低直流输电换相失败概率的控制方法-电网技术

39 卷 1 期 电 网 技 术 Vol. 39 No. 1 20 15 年1 月 Power System Technology Jan. 20 15 文章编号:1000-3673 (20 15)01-0076-07 中图分类号:TM 72 1 文献标志码:A 学科代码:470 4051 一种降低直流输电换相失败概率的控制方法 1 1 2 1 2 1 刘羽超 ,郭春义 ,许韦华 ,赵成勇 ,阳岳希 ,李春华 1.新能源电力系统国家重点实验室(华北电力大学) ,北京市 昌平区 102206; 2.国网智能电网研究院,北京市 昌平区 102200 ) A Control Method to Reduce Commutation Failure Probability in HVDC Power Transmission 1 1 2 1 2 1 LIU Yuchao , GUO Chunyi , XU Weihua , ZHAO Chengyong , YANG Yuexi , LI Chunhua (1. State Key Laboratory of Alternate Electrical Power System With Renewable Energy Sources(North China Electric Power University), Changping District, Beijing 102206, China; 2. State Grid Smart Grid Research Institute, Changping District, Beijing 102200, China) ABSTRACT: To reduce the probability of commutation 相失败机理,得出促进换相过程的关键。首先,基于数字信 failure in HVDC power transmission system, the mechanism of 号处理器实时监测装置,结合故 电压和故 电流特征,提 commutation failure is analyzed and the key factors to promote 出了一种功率分量检测法。然后,利用该方法的故障检测结 the commutation process are obtained. Firstly, based on 果,提出了一种基于电流指令速动的控制方法,能迅速减小 real-time monitoring device composed of digital signal 直流电流。理论分析表明,功率分量检测法具有更好的灵敏 processor and combining with the features of fault voltage and 性与准确性,而电流指令速动控制不仅能快速减小换相面 fault current, a power component detection method is proposed; 积,而且在一定程度上增大了换相电压。在PSCAD/EMTDC secondly, based on the fault detection results a quick current 中搭建了双馈入直流输电系统模型。仿真结果与理论分析相 order limiter based control method, which can quickly reduce 符,证明所提出的功率

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档