The Modal Analysis of Vibro Ripper Gear based （振捣开膛手齿轮的模态分析的基础）.pdfVIP

IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 05, Issue 08 (August. 2015), ||V1|| PP 08-14 The Modal Analysis of Vibro Ripper Gear based on CATIA 1 1 2 Hu Kaijun , Yang Guoping , CaoGuojun 1.Automotive Engineering College, Shanghai University of Engineering Science, Shanghai 201620, China 2. Shining Shanghai Mechanical Technology Co.Ltd,Shanghai,201804,China Abstract: - Through the parametric design and FEA function of CATIA, we build 3D model and finite element modal of Vibro Ripper gear. Meanwhile, we make modal analysis of gear and get natural frequency and modal shape of it.The analysis shows when the gear rolls at a high speed, gear will create a centrifugal stiffening effect on account of the centrifugal elastic deformation. Besides, the natural frequency increases with gear鈥檚 speed and some modal shape changed. Moreover, the radius and thickness of block have a great impact on gear鈥檚 modal analysis, and radius impactsfrequency more intricate than thickness. Key words: Vibro ripper gear; block; natural frequency, modal shape I. INTRODUCTION The high efficiency and low noise of Vibro Ripper have attracted a widespread attention in engineering field. But now there are no more references about Vibro Ripper all over the world, it is new machinery[1]. Vibro Ripper creates force by gear with block and breaks stone or beton. The block roll by gear and becomes the main source of force, gear and block are the core of Vibro Ripper. On account of the special design of Vibro Ripper, it always vibrate heavily and some componentsare easy to be d