Transient Analysis of Disk Brake By using Ansys …（利用Ansys的瞬态分析盘式制动器u2026）.pdfVIP

Transient Analysis of Disk Brake By using Ansys Software G. Babukanth M. Vimal Teja Department of Mechanical Engineering, Nimra College of Engineering Technology, Ibrahimpatnam, Vijayawada E-mail : babukanthg@, Abstract - In this paper the thermo elastic phenomenon occurring in the disk brakes, the occupied heat conduction and elastic equations are solved with contact problems. The numerical simulation for the thermo elastic behavior of disk brake is obtained in the repeated brake condition. The computational results are presented for the distribution of heat flux and temperature on each friction surface between the contacting bodies. Also, thermo elastic instability (TIE) phenomenon (the unstable growth of contact pressure and temperature) is investigated in the present study, and the influence of the material properties on the thermo elastic behaviors (the maximum temperature on the friction surfaces) is investigated to facilitate the conceptual design of the disk brake system. Based on these numerical results, the thermo elastic behaviors of the carbon-carbon composites with excellent mechanical properties are also discussed. Keywords: Disk Brake, Cast iron, Heat Flux, Thermal Conductivity, FEA, ANSYS I. INTRODUCTION When the brakes are applied, hydraulically actuated pistons move the friction pads in to contact with the A disk brake consists of a cast