TS63000 jcidistribution（TS63000 jcidistribution）.pdfVIP

PB_TS-63000_09 2013 TS-63000 Temperature Sensor and Transducers Product Bulletin The TS-6300 series temperature sensors provide a passive signal that corresponds to the air or water temperature in heating, ventilating and air conditioning applications. They a passive resistive signal NTC K2, NTC K10, Pt100 or Pt1000 related to the sensed temperature. The TS-6300 temperature sensor series has been designed to work with Metasys and System91 field controllers. ■ Wide range of mounting types and signal outputs Allows more flexibility in sensor selection. ■ Different length of tubes and wells for duct and immersion applications Senses the temperature at the desired location ■ Bayonet mounting system No screws required to close the cover. Easy installation and servicing ■ For immersion applications, well can be mounted before duct sensor is mounted Easy installation and servicing ■ IP54 Ingress Protection (except cable sensor) Protection against condensation and water spray ■ IP67 Ingress Protection for cable sensor PB_TS-63000_09 2013 Application The TS-6300 are designed for measuring temperature in gaseous media of heating/cooling and air conditioning systems. In combination with the thermo-well the sensor are suitable for measuring temperature in liquid fluids. The TS-6300 series of temperature sensors provide, depending on the selected models: • NTC K2 resistance signal • NTC K10 resistance signal • Pt100 resistance signal (4 wires) • Pt1000 resistance signal The various TS-6300 output versions can be connected to the following Johnson Controls controllers: • Metasys • System 9100 series • TC-8900 series • TUC03 series