2011 students Surveying Practice report（2011名学生调查实践报告）.docVIP

2011 students Surveying Practice report To write thesis net: Internship Topic: Level i angle check Internship time: November 2 Internship Location: East Campus playground Internship Objective: In the center of the plate level, standards-axis collimation should be level when the two are not parallel, there is a small angle between the i Obviously, the leveling of the vial as the collimation and not level, while a small angle between the i due to the presence of i angle in leveling there is some error, thus affecting the accuracy of the measurements we need for checking the water level of the i angle with the horizontal. mastered Level of placement, targeting, fine level, reading, recording and calculating the height difference method. Internship tasks: completion of Level conventional checking project Internship process: 1. Choose the venue rack instrument .2. Coarse leveling, first with both hands (or vice versa) the direction of rotation of a pair of spiral, observe the laws governing the operation between the circular vial bubble moving direction with the left thumb movement direction, and then the left hand third screw rotation, after repeated adjustments so that the circular level is centered .3 aim, first telescope on a bright background, rotating eyepiece focusing screw, the crosshairs clear; then telescope sight sighting erected in points leveling rod light rotating light spiral; last rotation fretting spiral, the crosshairs vertical wire located in the level ruler the midline or feet on the edge of complete light .4. the refined flat, rotating tilting spiral, from the line Bubble observed the movement of the bubble, the both ends of the bubble the anastomosis. 5. readings wire crosshairs read meters, decimeter, centimeter, estimates mm digit readout the pencil record .8 calculation, read stand two level ruler reading one or more measuring points, and calculate different height difference. Internship topics: closed traverse measurements