2012 Glass Factory Practice report（2012玻璃工厂实践报告）.docVIP

2012 Glass Factory Practice report A practical purpose and mission Float glass factory in Jiangmen, site visits, learning, understanding of the production process of architectural glass in the original film, the original glass deep processing, deep processing of the product performance and use of glass technology for the future lt;lt; school gt;gt; learning professional courses lay the foundation. Second, the internship requirements Factory technical staff under the guidance of the glass production process, production equipment, the original glass deep-processing technology, and production organization and management, while the systematic investigation and study. Alumni seminars and on-site visits, a comprehensive understanding of the float glass production processes and deep-processing technology. Third, the practice content 3.1 Jiangmen glass factory 3.1.1 Jiangmen float glass float glass production process Main two parts of the production of float glass, one is the workshop of ingredients, processing of raw materials, mixing, distribution, and a float workshop, the main production process furnace, tin bath, annealing, cut cut mining board packaging. Because of the time, we did not visit the batching plant, but the float workshop, a direct visit. Float workshop production process input feeding machine, this mixture after the hopper into the furnace in the furnace within the endothermic melting furnace on both sides of the regenerator, to play the role of preheating combustion air, melting kiln oil guns from both sides of the furnace flame, the flame at the top of the mixture in the lower part of its raw materials, there are six , quartz sand, dolomite, silica, carbon black, limestone, soda ash, Glauber’s salt. card neck, serve to prevent the melting of the Ministry of heat into the cooling and energy-saving of the role of bubbles in the melting process in the melting department and the Ministry of cooling small bubbles become larger d