地大《建筑结构抗震设计原理》在线作业二（Ground floor earthquake resistant design principle of building structure online homework two）.doc

地大《建筑结构抗震设计原理》在线作业二（Ground floor earthquake resistant design principle of building structure online homework two） Ground floor earthquake resistant design principle of building structure online homework two Total score: 100 test time: - Radio examination A multiple-choice question Radio examination questions (20 questions, 80 points) 1., the basic seismic acceleration of a region is 0.15g. For the seismic design of the third class building in this area, the following statement is correct. A. according to the requirements of 8 degrees for seismic design, according to the fortification of 7 degrees, take seismic measures B. conducts seismic design at 7 degrees (including calculations and seismic measures) C. according to 7 degrees for seismic calculation, according to 8 degrees fortification, take seismic measures The seismic calculation of D. is carried out at 7 degrees, and the construction measures can be reduced appropriately Full marks: 4 2. the high-rise buildings that must be maintained for normal use and disaster relief during the earthquake are as follows. A. a kind of building B. class a building C. two types of buildings D. class B buildings Full marks: 4 3. near earthquakes and teleseismic earthquakes are correct in the following statements From the epicenter near the earthquake near the earthquake A.; The seismic effect of B. teleseismic is smaller than that of near earthquake; C. teleseismic is an earthquake affected by an earthquake in a region, which comes from a fortification intensity greater than two or more degrees than that in the area; D. earthquakes with larger magnitudes and epicentral distances are more destructive to the shorter rigid structures than the same intensity and smaller epicentral distances. Full marks: 4 4., it is better to choose () analysis method for coupled shear walls. A. mechanical analysis of materials B. continuous method C. wall to frame analysis D. finite element method Full marks: 4 5., which of the following statements