HT-7等离子体密度扫描试验研究刮削层径向输运对碰撞率的依赖-EAST.PPT

ASIPP HT-7 Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, P.R.China 颜宁， 徐国盛，张炜，常加峰，明廷凤 Edge probe team HT-7 等离子体密度扫描实验 研究刮削层径向输运对碰撞率的依赖 It is widely believed bow that transport of particles and energy in edge and SOL of tokamak s mostly non-diffusive and occurs in the form of the intermittent convection of coherent plasma structures (blobs). The plasma collisinality is proportional to the particle density and magnetic connection length, it is expected that blob velocity radial convective transport should increase with increasing line- averaged density and decreasing plasma current . Velocity and size scaling of blob in different parameter regime are focus topics ITER concern. It has been investigated on many tokamaks . 实验条件 欧姆放电和低杂波放电 等离子体密度扫描 ,1-3( 10^19m^-3)步长0.8 ( 10^19m^-3) 爬升研究碰撞率依赖 气动探针测量边界参数 实验目的 1 SOL 中的径向输运对碰撞率的依赖 2 Blob 相干结构的空间尺度和径向速度对碰撞率的依赖 3 刮削层厚度随碰撞率的变化及其与理论模型的比较 Scaling of the maximum radial centre of mass velocity for an isolated blob structure as function of sheath dissipation in simulation Radial partical density profile becomes broader with decreasing plasma current time-averaged particle density profile The fluctuation levels and turbulence driven radial particle flux increase. with decreasing plasma current The potential profile at low is clearly not determined by the sheath boundary conditions alone. turbulence driven radial particle flux increase with decreasing plasma current. The fluctuation level of the estimated radial electric drift velocity decreases with increasing radial coordinate and plasma current. There is an increase with radial coordinate for high and is roughly constant as function of radius for the lowest currents : the mean free path for electron-ion collisions : The magnetic connection length blobs speed up with collisionality for low , small blobs move fastest for large ,larg