塔吊拆迁中应注意的几个问题（Several problems should be paid attention to in the demolition of tower crane）.docVIP

塔吊拆迁中应注意的几个问题（Several problems should be paid attention to in the demolition of tower crane） Several problems should be paid attention to in the demolition of tower crane Along with the construction project gradually to the tall, short period direction, the demolition of tower crane in the construction of the increasingly frequent disassembly has become a very important part of the work. On the basis of ten years work experience, some problems that should be paid attention to in the tower crane demolition are discussed with colleagues in order to improve them. 1 installation site selection In the premise of selected models of the tower, the installation site should be selected at the following matters: one can complete the whole installation engineering construction, to avoid two shift; avoid dead construction plane; the fixed attachment point selection and convenient installation; the completion of construction of tower crane disassembly and convenient transportation; 5. The construction space to avoid the buildings, high voltage power grid; and help to install other equipment and lifting construction components according to the construction needs. 2 personnel organization The loading and unloading of tower crane is an important, dangerous and stressful three-dimensional operation project. It must be paid great attention to by ideology and fully guaranteed by organization. In addition to the necessary construction management and professional and technical personnel, all construction personnel should undergo professional education, with the corresponding types of safety knowledge, operational skills, certificates. The installation and construction of tower cranes shall be carried out by professional construction teams. 3 provision for construction equipment and equipment 3.1, should pay attention to the problem The transfer of tower crane generally involves disassembly, transportation, installation and other links. The equipment and machinery must be carefully arran