感应式磁声成像正问题数学模型及仿真.PDFVIP

28 卷 4 期 中　国　生 　物 　医 　学 　工 　程 　学 　报 Vol . 28 　No . 4 2009 年 8 月 Chinese J ournal of B iomedical Engineering August 　2009 感应式磁声成像正问题数学模型及仿真 　 许国辉 　刘志朋 　李经宇 　殷 　涛 ( 中国医学科学院北京协和医学院生物医学工程研究所 ,天津 　300192) 摘 　要 : 就感应式磁声成像的正问题 ,探讨该新型功能成像方法的可行性 。建立了感应式磁声成像正问题的数学 模型 ,并利用有限元软件 Comsol Multiphysics3 . 4 进行仿真实验 ,得到不同电导率分布的导体内部的感应电流分布及 声压分布 ; 同时 ,研究了线圈与物体相对位置参数 α对感应电流的影响 。仿真结果表明 ,感应电流密度在中心位置 处为零 ,在电导率边界处变化较大 ;声压分布在中心位置处为零 ,在边界处变化较大 。仿真结果与理论推导相符 , 进一步说明可由声信号重建物体内部的电导率分布方法的可行性 。 关键词 : 磁声成像 ; 正问题 ; 感应电流 ; 声压 Mathematical Model and Simulation of For ward Problem on the Magnetoacoustic Tomography with Magnetic Induction XU GuoHui 　LIU ZhiPeng 　LI JingYu 　YIN Tao ( Institute of B iomedical Engineering , Peking Union Medical College Chinese Academy of Medical Sciences , Tianj in 300192) Abstract : The aim of this study is to investigate the feasibility of the new functional imaging method . A theoretical model was constructed for the forward problem of magnetoacoustic tomography with magnetic induction , and the simulation study was carried out using Comsol Multiphysics 3 . 4 software . The distribution of induced current and the acoustic pressure inside the spheres with different conductivity were presented . Furthermore , the relative position between the coil and the obj ect was introduced to get its influence on the induced current . The induced current and the acoustic pressure was zero at the central of the obj ect and varied rapidly on the boundary with different conductivity. The simulation