16米后张法预应力空心板计算书.doc

武汉工业学院毕业设计2007届 摘 要 本次设计为广州街口至东明（市界）公路谷星大桥设计，通过对桥位的选定，地质资料的分析，水文及地理因素，经济及技术因素的考虑，确定了本桥的跨径及截面形式。概述桥梁施工方法，结合施工实际情况，采用装配式后张法预应力混凝土空心板桥。设计的主要 后张法预应力 混凝土空心板。 I 武汉工业学院毕业设计2007届 ABSTRACT The current design for the high-speed Jiekou-Dongming, Guangzhou North Gu-Xing Bridge design through the spaces selected for the bridge, geological data analysis, hydrological and geographical factors, the economic and technical considerations, the number of initial programme than elections, the bridge began to identify and cross-sectional form. Bridge construction methods outlined, with the actual construction of a reinforced concrete cast in place ordinary consecutive beam. Fabricated using post-tensioned concrete hollow Panchiao. Design is the main content of prestressed concrete hollow plate structure, Bridge Superstructure of 7 × 16m. As well as the upper bridge structure combination of internal forces, Reinforcement, the bridge capacity Shearing checking cracks and width. At the same time completing the corresponding drawings. The main contents are the following : (1) Overview of the project (2) Design of bridge type and bridge section (3) Bridge Construction Methods (4) Bridge structures Keywords：bridge design Post-tensioned Concrete Hollow plate. II 武汉工业学院毕业设计2007届 目 录 摘要............................................................................................................................... I Abstract ....................................................................................................................... II 前言............................................................................................................................ IV 第1章 工程概况........................................................................................................ 1 第2章 桥型及桥梁截面设计 ................................................................................ 5 第3章 桥梁施工方法概述 .................................................................................... 9