gps的应用（Application of GPS）.docVIP

gps的应用（Application of GPS） The application of a control point coordinate Library The GPS receiver output data is WGS-84 latitude and longitude coordinates need to be transformed to the construction of coordinate measuring, which requires the software to calculate and set the coordinate transformation parameters, the main tool control point coordinate library is to complete this work. The coordinates of the control points is base four parameters calculation and elevation fitting parameters of the tool can easily edit, view, call the four parameters involved in the calculation and correction of control point elevation fitting parameters. In the calculation of four parameters, at least two control points of the two sets of coordinate system in the calculation can meet the control requirements of the minimum. Height fitting, elevation using three points when calculating the coordinates of the control points for elevation fitting weighted average elevation; using 4 to 6 points, the coordinates of the control points of plane base height fitting; elevation more than 7 points, the coordinates of the control points of curved surface fitting library. The control point selection and plane and elevation fitting have close relationship directly, the content involves a large number of classic distributed measurement and control network knowledge, there is no way to do this here, suggest the user access to relevant data. The coordinates of the control points database approach is roughly like this: if we use A, B of the two known points to calculate the parameters, then we must first have A and B two GPS original records and coordinate construction coordinate measurement. A, B, GPS coordinates of two points in the original records obtained in two ways: one is the static control network layout, using the original record coordinates of GPS static control network layout postprocessing software; the other is a GPS mobile station in the absence of any correction parameter function Fixed