hdpe连接法（HDPE connection method）.docVIP

hdpe连接法（HDPE connection method） HDPE (high density polyethylene) method of connecting pipe The HDPE pipeline with its reliable connectivity, long service life, good impact resistance, good flexibility, small fluid resistance and excellent corrosion resistance, is widely used in water supply system, air conditioning system, sewage, chemical pipes, communication pipeline, trenchless pipe threading and deep water in other fields. Especially the method of connecting the flexible HDPE pipe system to provide the solutions under different environmental conditions. HDPE pipeline with reliable connectivity, long service life, good impact resistance, good flexibility, small fluid resistance and excellent corrosion resistance, is widely used in water supply system, air conditioning system, sewage, chemical pipes, communication pipeline, trenchless pipe threading and cage etc.. Especially the method of connecting the flexible HDPE pipe system to provide the solutions under different environmental conditions. HDPE pipeline connection methods commonly used are: welded connections, welded connections, connecting hoop with sealing ring socket type casing connection, threaded connection method, linear telescopic socket pipe connection, flange connection, clamp connection method. These methods have different performance characteristics of each connection, use and installation are not the same. A butt joint. Butt welding for all diameter from the tube diameter of 32-315mm. The performance characteristics of the connection method is: rigid connection, can not be disassembled, tensile strength. Butt welding is a fitting simple connection method, it provides many convenient condition for the precast system installation, and no other parts. Therefore, whether it is prefabricated in the field or in the workshop can be used in butt welding. Butt welding section is very small, the welding edge will not interfere with the pipeline, the pipeline internal cross section and there is no change. A