ibm t22 bios设置（IBM T22 BIOS settings）.docVIP

ibm t22 bios设置（IBM T22 BIOS settings） IBM T22 BIOS set First, restore the system default settings 1, boot press F1 to enter the BIOS setup, 2, move the cursor to RESTART (start) and press enter, enter setup 3, move the cursor to the Load setup defaults (default) and press enter will appear YES and NO YES 4, move the cursor to the Exit saving changes (save changes and exit), and OK. Two, the machine information system BIOS Version: shows the current version of BIOS. BIOS Date: BIOS release time. System-unit serial number (host serial number): the IBM notebook computer only serial number, IBM warranty service is to the serial number for the document. The original IBM notebook computer has the serial number in the box body, and BIOS. Only 3 of these sequence numbers are exactly the same, only the IBM notebook computer is not too passive. System board serial number (sequence number): for each piece of IBM notebook computer motherboard unique serial number. The sequence number IBM will verify the motherboard in the warranty, and compared with the data in the database, to determine whether the original motherboard. CPU Type said: the notebook computer using CPU model. for example Pentium (R) III-Intel (R) SpeedStep Technalogy, said that the computer is used in notebook computer dedicated Mobile Pentium III CPU. CPU Speed said: the frequency of CPU, shown above is 900MHz. Install memory said: the current installation of notebook computer memory. IBM notebook computer BIOS settings interface is shown above the main menu options. Options with a triangular arrow behind the sub menu, use the up and down arrow keys to move the cursor to an option on, press the Enter button to open the menu. Config Three, BIOS set 1, Config 2, Date / Time 3, Password 4, Startup 5, ReStart 1.Config (set) option. This is the most important BIOS IBM notebook computer settings are concentrated in the options, such as card / wireless card set, serial and parallel port settings, infrared interface set