rl00系列条码秤通用说明书（RL00 Series bar code weighing universal manual）.docVIP

rl00系列条码秤通用说明书（RL00 Series bar code weighing universal manual） Toledo RL003600/4600 series scale bar set 2007-12-27 21:22 The following is a reprint: Toledo scale bar set For a new scale bar, need to do the following work. First, on the scale of operation 1, format After the boot followed by code, *, (SERVICEMODE screen display), enter 15, * (screen WORK CONFIG), and 1 (CONFIG 0-1 screen display), *, automatic restart scale bar after initialization. Note: this operation will scale bar in the data format and configuration data back to factory value. 2, set the scale. After the boot followed by code, * (screen SERVICE MODE), enter 08 (screen PRIMARY), * (screen SCALE NUMBER), the input scale, such as 10, *. Note: the scale number and IP address are two concepts, there is essential difference with Si gang scale. Is the title or scale scale is a kind of marking, IP just scale IP address. 3, set the IP address Followed by the code, *, (SERVICEMODE screen display), enter 21 (screen NETWORKCONFIG), * (screen IP ADDRESS) then appears on the screen of a string of 0, direct input IP address, such as 192.168.0.10, direct input 192168000010, input after the press down key (screen NET MASK) and then the screen appeared a string of 0, directly enter the subnet mask 255255255000, after the input has been to down key until the IP is set to automatically restart after weighing. 4, set the print strength and reverse function Followed by the code, *, (SERVICEMODE screen display), enter 25, * (screen display RESIST 600999 default 850), * (screen display SPEED 85mm/S default print speed is set to 0-5.) * (screen display ENERGY -4+4 default 1. Print settings) will be here to set the strength of 3, *, * (screen display REWIND NO default 0, reverse function setting) here will be set to 1, press * button until the screen display 25 LABLE PRINTER, according to the code button to exit. Note: the reverse function explanation: do not use this function, pr