丝印网版制作（Screen printing, screen making）.docVIP

丝印网版制作（Screen printing, screen making） Printing plate making A direct method, liquid photosensitive adhesive The advantages of the sensitive glue has the advantages of simple technology, economical and practical. The exposure characteristics of fast, durable and easy to screen film, excellent solvent resistance, its production process is: The net processing and network selection, with glue, glue, drying, exposing, developing,. The working environment temperature is 15~20 DEG C, relative temperature 50~65%, darkroom operation under the Yellow light. [recommended: PS version] The net processing and network selection The new screen must be used for the net net grinding paste treatment before use, each screen should use thoroughly degreasing degreasing agent, specific operation method is water wet screen on both sides, coated with a clean version of cream or liquid degreaser, then brush coated evenly and set aside for 1 minutes, and finally rinse clean. Used if no longer in use, available remover soak, then rinse, must do degreasing treatment process before use. Screen cleaning after drying. Network can be selected according to the net net slips required: silk screen mesh line with the general 120T / cm solder, 100 - 120T / cm, 120T / cm 100 characters, 43 carbon bridge oil 120T, India Lanjiao 36T 18 stripping. But with glue The direct method of photosensitive glue at present on the market there are two types: one is single liquid type, this type is the sensitive glue sensitizer in the production of direct preparation, the type can be used directly; the other is two yuan curing photosensitive adhesive. The sensitive glue must be configured before use, namely the sensitizer adding water after mixing evenly into the emulsion, after about fully mixing, is prepared to complete. Work with glue in order to complete at least two hours before use, the best method is to work with good rubber in a previous work, second days work with. Remember, with a good glue must rest for 2 ho