丝网印刷连续调图像阶调复制原理（Principle of step by step reproduction of halftone images in screen printing）.docVIP

丝网印刷连续调图像阶调复制原理（Principle of step by step reproduction of halftone images in screen printing） Continuous tone image halftoning replication principle Continuous tone image shades (tone), in on the coverage achieved by network. A dot to transfer image toning Figure A is a shot with the camera continuously adjustable positive film, with its drying out after screen printing, the figure B effect, negative shades are lost, only black and white on the other, this is because of the excessive halftone film corresponding to the screen of the photosensitive layer in print, not enough light photochemical reaction occurs when developing, off, forming an image based damage caused by. Figure A Figure B The gradient of the transfer network In order to put the original image brightness level reproduced, must produce screen film, the image is divided into many of the ideas is not continuous, then drying to the plate, and then used for printing. A printed sheet unit, the total area of ideas, the ink coverage rate is high, reflecting light, light absorption, make people feel dark; unit area sheets, the total area of the idea of small, ink coverage rate is low, the reflected light, absorb light, give a person with bright feeling. So the original image gradation, on a sheet can be reproduced. The formation of the network technology, is used to show the graphics shading point is called dot. In printing, network is the basic form of printing unit continuous tone image. Through image processing, in print by the unit and the image contrast blank, to reproduce the effect of continuous tone. Two, the characteristics of network In printing, image processing, in accordance with the method of screening, divided into AM network and FM network. (1) AM network AM network is the most commonly used traditional outlets, also called amplitude modulation dot. General in the camera, the screen or in electronic color separation, through the network using a laser beam generator, electronic and network forma