修改记录（Modify record）.docVIP

修改记录（Modify record） After a period of time will be the main function of each one by one in the software inspection improvement relates to the new standard of local update 2011.06.03 The steel structure calculation of the following modules of improvement: Section parameter query: according to the GB/T 11263-2005 update the hot-rolled H steel base Weld calculation: increased WORD format statement adds a user-defined material library, increase the data storage and reading Bolt group calculation: increased WORD format calculation, increase the data storage and reading 2011.05.20 Will the snow load check again, the individual data error correction 2011.05.10 The fortification around according to the new seismic code update 2011.04.15 The increase of AutoCAD2011, 2012 support 2011.04.02 The structure of the drawing module in the left hand to band correction: 1, correction settings could not be saved in the ACAD2000~2006 version of the problem 2, modify the beam stirrup reinforced with stirrups with grade 3, increase and whether combined with Liangping shift option 2010.10.29 The software settings module batch print function optimization of batch print function increase choice Atlas The structure of the drawing module in round tube blocklines function optimization -- point increase direction The characters in character statistics tool module function optimization -- increase double positioning function 2010.10.28 Increase the linear arrangement function of the general drawing module, let the line or PLine line between the endpoint selected and the selected reference point DX, Dy is integer modulus. The display module layer and layer switching function, can quickly set the current layer, but also to quickly switch its graphic layer. 2010.08.08 Increase the self image function of general drawing module, so that multiple graphics can be selected according to the specified image direction according to their own point together with the mirror. Increase the PKPM standard level r