CT Commander SE系列变频器英文说明书.doc

Commander SE Sizes 1 to 5 Variable speed drive for 3 phase induction motors from 0.25kW to 37kW Part Number: 0452-0061 Issue Number: 8 FE User Guide General Information The manufacturer accepts no liability for any consequences resulting from inappro- priate, negligent or incorrect installation or adjustment of the optional operating pa- rameters of the equipment or from mismatching the variable speed drive (Drive) with the motor. The contents of this User Guide are believed to be correct at the time of printing. In the interests of a commitment to a policy of continuous development and improve- ment, the manufacturer reserves the right to change the specification of the product or its performance, or the contents of the User Guide, without notice. All rights reserved. No parts of this User Guide may be reproduced or transmitted in any form or by any means, electrical or mechanical including photocopying, re- cording or by an information storage or retrieval system, without permission in writ- ing from the publisher. Drive software version This product is supplied with the latest version of user-interface and machine control software. If this product is to be used in a new or existing system with other Com- mander SE Drives, there may be some differences between their software and the software in this product. These differences may cause this product to function dif- ferently. This may also apply to Drives returned from a Control Techniques Service Centre. If there is any doubt, contact a Control Techniques Drive Centre. Copyright Software: ? December 2001 Control Techniques Drives Limited V02.00.00 onwards Issue Code: 8 Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Safety Information Warnings, Cautions and notes Electrical safety - general warning System design and safety of personnel Environmental limits Compliance with regulations Motor Adjusting parameters 1 1 1 1 2 2 2 2 2 3 3.1 3.2 3.3 Options Technical Data Power dependant rating data General data