protaper的操作流程（Operation flow of ProTaper）.docVIP

protaper的操作流程（Operation flow of ProTaper） Operation flow of Protaper Operation flow of Protaper A. open marrow B. uses 10# and, 15#, Kfile, or, K, reamer to explore and build root canals. C. if the 15# file reaches the working length, the root canal is shaped directly; If the 15# file does not reach the working length, use the S1 and SX file to establish the root canal crown 1/3 straight line channel Be careful： 1.S1 shall not exceed the depth of the 15# file; 2. when the orifice of the root canal is narrower, it is suggested that S1 and SX be used to make the root canal orifice; 3. for short roots with a length less than 14mm, SX should be used instead of S1 (because the working length of S1 is only 14mm) D. re explore the root canal to determine the length of the work. Be careful： 1. when measuring the length, keep the marrow cavity dry and keep the humidity in the root canal; 2. of the patients tongue and lips can not touch the needle, measuring the needle can not be contacted with other instruments E. uses S1 file for root canal crown 1/3 preparation F. uses S2 file to prepare the 1/3 in the root canal G. prepares the root canal tip 1/3 with the F1 file Be careful： 1., when you start using the NI-TI instrument, rotate 1/4 to 1/2 turns each time to prevent the instrument from breaking 2., in case of resistance, should be removed in time to remove the file surface of the dentin chip. 3. each preparation must reach the length of the work. 4. every time after the completion of the preparation, you should do a good job of washing. Try the 20# gutta percha tip. If the 20# gutta percha tip reaches the working length, the root canal preparation has been completed and root canal filling can be performed. H. If the apical foramen is larger, the 20# gutta percha points exceed the apical foramen, and the F2 file should be used for the preparation of the apical region so that the 25# gutta percha tip can reach the proper filling. I. if the apical foramen is large, the 25# gu