飞机泊位引导系统--机务操作.pptVIP

SAFEDOCK 飞机泊位引导系统;;培训背景;培训主要内容;一、系统介绍;1、业绩;;;2、系统组成及功用;A、Control Unit控制单元;B、Laser Scanning Unit激光扫描单元;C、Operator panel操作员面板;D、Display Unit显示单元;E、GOS Interface GOS接口;3、技术特点;;;;LED显示屏;;;;;;;;;二、泊位引导系统操作流程;飞机引导简图（详细讲解）;Operator panel手动操作板;Operational states 运行状态;1、飞机进港前准备; (2) Local start of docking 本地激活 If the stand doesn’t receive the flight, or when the flight information is wrong, crew at the scene press the key corresponding Shut down to close the schedule flight，press the key Start Dock, and then select the aircraft by hand. 如该机位未接收到航班信息，或者本地机位航班信息机型错误，现场机务按“shut down”（关闭）对应的软按键关闭该预订航班(该操作需要操作级密码，输入正确的密码后会显示“READY”)。点击“启动泊位”按键，然后手工选择机型(需要操作级密码)。 ;C、Operator panel will display the selected aircraft type, flight number (Actived by Scheduled) TEST. The ADGS will start to conduct calibration check before docking during this time the LED housing will display WAIT. 在确实航班信息后或者手动选择机型后，手动操作板上显示已选机型，航班号（预定航班激活的才有，如果是本地激活的则只有机型显示）和TEST（测试）。 ADGS将进行引导前校准检测，同时 LED屏显示“WAIT”（等待）。 ;D、When calibration check is completed and system ready, operator panel will display the selected A/C type ，flight number( Actived by Scheduled)，LED housing will display A/C type, The floating rows indicate that the system is activated and in capture mode, searching for an approaching aircraft. System will remain in this state for up to 30 minutes. 校准检测完成后，系统处于激活状态。操作板上显示已选飞机的机型、航班号（预定航班激活） ,LED显示屏显示机型，并有闪烁箭头提示系统处于捕获状态，开始搜寻入位飞机。系统可保持此激活状态 30分钟。 ;2、飞机进港;重新激活系统;（3） Display will show WAIT . 显示屏提示“WAIT”（等待）。 （4） Wait till Operator panel shows A/C type，flight number (Actived by Scheduled) and ACTIVE . 等待至操作板显示机型、航班号（预定航班激活）和“ACTIVE” 激活。;飞机开始进港;B、TRACKING 跟踪 When the aircraft has been caught by the laser, the floating arrow is replaced by the yellow centre line indicator. A flashing red arrow indicates the direction to turn. 飞机被激光扫描仪捕获后，闪动