【2017年整理】扫描速度对镁合金激光熔凝层组织及性能的影响.pdfVIP

~~ 扫描速度对镁合金激光熔凝层组织及性能的影响 1 1, 2 1 包全合, 赵 昆 , 刘家阔 ( 1. 安徽工业大学材料科学与工程学院安徽省金属材料与加工重点实验室, 安徽 马鞍山 243002; 2. 中国重型汽车集团有限公司, 山东 济南 250002) : 采用 500W 脉冲激光器以不同扫描速度在 A 91D镁合金表面进行激光熔凝, 运用 XRDSEMEDS 等手段测试了熔凝层的组织显微硬度耐磨性耐腐蚀性等结果表明, 激光熔凝能提高镁合金的 表面硬度及耐磨性, 但未能提高其耐蚀性能激光扫描速度对熔凝层的硬度影响不大 : A 91D镁合金; 激光熔凝; 性能 : TG665; TG166. 4 : A : 1008-1690( 2010) 06-0026-004 E ffect of Scann ing Speed on M icrostructure and P rop erties of L aser M elted Case of M agn esium A lloy 1 1, 2 1 BAO Quan-he, HAO Kun , LIU Jia-kuo ( 1. AnhuiKey Laboratory ofMaterials and Processing, School ofM aterials Science and Engineering, AnhuiU niversity ofTechnology, M a anshan 243002, Anhu;i 2. China NationalH eavy Duty T ruck Group Co., Ltd., Jinan 250002, Shandong) Abs tract: The lasermeltedA 91Dm agnesium alloy caseswere prepared with a 500W pulse laser at different scan- ning speeds. The m icrostructure, m icrohardness, wear and corrosion resistances of laser melted caseswere tested by XRD, SEM, and EDS. The results show that the lasermelting may mi prove the surface hardness and wear re- sistance ofA 91Dm agnesium alloy, but the corrosion resistance w ill not be increased. In addition, the laser scan- ning speed has no considerable influence on the hardness of lasermelted cases. K ey w ord s: A 91D m agnesium alloy; lasermelting; property , 1mm, , , , , , 5% , NaCl 10