英语文献作业.pdfVIP

科 技 英 语 阅 读 与 写 作 题 目 Sub-pixelDimensionalMeasurement withLogisticEdgeModel 学 院 计算机学院 专 业 计算机系统结构 姓 名 杨娜娜 学 号 1503121524 Parterner 姓 名 高 燕 学 号 1503121602 Sub-pixelDimensionalMeasurementwith LogisticEdgeModel Ping Chen,Fang Chen,YanxiangHan, ZhishengZhang∗ Abstrac — (1)To separate substandard workpieces from products,sub-pixel edgelocationwith Logisticedgemodelis proposed for dimensional measurement. (2)In the first step,workpiecerotation is corrected with high precision image rotation to reduce the measurement error and simplify the edge model. (3)Secondly,Logistic edgemodel is utilized for fitting the discrete edge data to locate the sub-pixel workpiece edge and model parameters are estimated through the objective function in terms of the differencebetween assumed model and real image data. (4)Finally,an edge pixel compensation method is presented with edge pixel compensation value,which weakens the effect of edge transition zone effectively. Experimental results demonstrate that the proposed method is effectivefor dimensionalmeasurementwiththerelativeerrorlessthan 0.05%. Keywords:Sub-pixeledgelocation,Logisticedgemodel,Rotation correction,Edgepixelcompensation 1. Introduction (5)Becauseofnoncontact,inexpensiveandautomation,machinevision technologyis investigatedandappliedto measureinmanyfields,suchas industrialinspection,photogrammetryandmedicalimagemeasuremen- t[1].Themeasureddimensions areeffectivelylocateonthesameplanesas imaging planes of the objects,and (6)it makes sense to use two-dimensional measures on three-dimensional objects. (7)Meanwhile,themeasureddimensionsaremostlynotso largethat