sulfur tolerant magnesium nickel silicate catalyst for reforming of biomass gasification products to syngas硅酸镁镍催化剂硫宽容生物质气化产品合成气的改革.pdfVIP

Catalysts 2012, 2, 264-280; doi:10.3390/catal2020264 OPEN ACCESS catalysts ISSN 2073-4344 /journal/catalysts Article Sulfur Tolerant Magnesium Nickel Silicate Catalyst for Reforming of Biomass Gasification Products to Syngas Richard Q. Long *, Scott M. Monfort, Gene B. Arkenberg, Paul H. Matter and Scott L. Swartz NexTech Materials, Ltd., 404 Enterprise Drive, Lewis Center, OH 43035, USA; E-Mails: s.monfort@ (S.M.M.); g.arkenberg@ (G.B.A.); phm@ (P.H.M.); s.swartz@ (S.L.S.) * Author to whom correspondence should be addressed; E-Mail: r.long@; Tel.: +1-614-842-6606; Fax: + 1-614-842-6607. Received: 17 January 2012; in revised form: 15 February 2012 / Accepted: 26 March 2012 / Published: 17 April 2012 Abstract: Magnesium nickel silicate (MNS) has been investigated as a catalyst to convert tars and light hydrocarbons to syngas (CO and H ) by steam reforming and CO reforming 2 2 in the presence of H S for biomass gasification process at NexTech Materials. It was 2 observed that complete CH4 conversion could be achieved on MNS catalyst granules at 800–900 °C and a space velocity of 24,000 mL/g/h in a simulated biomass gasification stream. Addition of 10–20 ppm H S to the feed had no apparent impact on CH conversion. 2 4 The MNS-washcoated monoli