纸张的分类（Paper classification）.doc

纸张的分类（Paper classification） Paper size classification and usage common sense, 2007, 05, Tuesday, 22, 18:00 The national standard size is adopted by the international standard series, has now been set into the national industry standard GB / T 1999, the implementation of the country. Books and journals of the current format and size are mainly A series specifications are the following: A4 (16K) 297mm * 210mm; A5 (32K) 210mm * 148mm; A6 (64K) 144MM * 105mm three A3 (8K), which has been set in size, but generally with 420mm * 297mm. A2 (2k) 420mm * 594mm. The concept of numbers and folio Usually a piece of flat paper cut according to the national standard is called full open paper. In order not to waste paper, printing and binding for production operation is the premise, the number of Zhang full paper cutting into equal area called how much they will number; bound, is called the number format. For the main body of a book, open the number and the meaning of the same format, but with its cover and insert the paper on the number, because of the different area, the different meanings. Usually the size of the single page publication, known as the opening, such as newspapers, maps, divided into a piece of eight or four open and open etc.. As the international and domestic paper formats have several different series, so they are cut into the same number, but the sizes are different. In actual production, a full sheet of 787 * 1092 (mm) or 31 * 43 inch paper is usually referred to as a positive paper. The full sheet of 889 * 1194 (mm) or 35 * 47 inch paper is called generous paper. Because the format of 787 * 1092 (mm) paper is defined by our country and is not consistent with international standards, it is a non-standard format that needs to be phased out. In order to fold into easy bookbinding, printing paper is mostly in the 2 times of cutting. Uncut paper referred to as a piece of paper, the folio trimmed format called for open or semi open; put on paper and then fold afte