施工经验总结(新手)可用（Construction experience summary (novice) available）.docVIP

施工经验总结(新手)可用（Construction experience summary (novice) available） Construction experience summary (novice) available Foundation test trough or test pile Check slot (shallow foundation), will be accompanied by the staff survey together, and whether the field investigation report, if there is abnormal place, nature of the main observation bearing layer, such as we are in the area of shallow foundation No. 2 Hicks. The soil is hard, yellowish brown color, also will be mixed with some differentiation material the other side of the 2. The soil is thin, generally is 1~2 meters, so the site can be used 12 rib steel insert bearing layer, see after the removal of the soil and the depth in the steel stick to determine its thickness. The pile (pile), which are mainly based on the bearing capacity of the pile to calculate the pile machine tonnage according to check, soil geological report any abnormal (mainly through the pile pile up to judge), observe the last 1 meters used in degree, the pile up phenomenon is obvious, the current pile machine check. Especially the strict control of cast-in-place piles to a filling coefficient of cement mixing. Mixing piles shall focus on controlling the water cement ratio, the cement content per metre, and the number of re stir Basic reinforcement acceptance: As the name suggests, the focus of course is to check the reinforcement, including steel information is not comprehensive, factory reports, approach reports, experimental reports The scene also according to the drawings to check the steel spacing \ location] wire is not consistent with the specifications \ basic size, protective layer thickness of welding, check the quality of appearance Ask for the test report of welded joints. The length of joint, the length of anchorage, and the quality of the reinforcement works best at the joints (the main beam and the main beam, the Liang Zhu joint) Measured. The additional reinforced beam, such as beam hanger and floor hanger setting mode is the op