无机预涂板应用分析（Application analysis of inorganic precoating plate）.doc

无机预涂板应用分析（Application analysis of inorganic precoating plate） Application analysis of inorganic precoated decorative board Inorganic precoating decorative board 1 Introduction As a kind of wall structure and finish materials, inorganic precoated decorative panels have been developed for more than 20 years abroad and have been widely adopted in many countries. As a new type of building material with good environmental protection, strong function and good construction application, it is gradually accepted by people. Especially with the development of wood structure and steel structure residence, the application of inorganic precoated decorative board will be more and more big. As in Japan, Japan is the country that earthquakes earthquake will cause cracks in the walls, cement mortar off problems, therefore, good seismic performance, high ornamental and inorganic pre installation characteristics of the short construction period and convenient coated decorative board from 1970 onwards has been rapidly applied in japan. According to market data in 2005, it has grown into a huge market with an annual total of 100 million square meters. There are three or four international inorganic pre coated decorative plate in foreign brands, such as: Glasal eternit, Belgium, Australia in Vitra, make-up board of Japan, Japan Nichiha (NICHIHA); Inorganic precoated decorative panels two, definitions Inorganic precoated decorative board in the international refers to the inorganic non combustible material as the base material, its surface by special technology and decorative coating, and eventually form can be directly installed, use without surface treatment of decorative sheet. The inorganic substrate pre coated decorative board requires high requirements better, the material strength of strong impact resistance, bending, bending, fire prevention, light weight, low water absorption, acid and alkali resistance, thermal expansion coefficient, Neuncha etc.. The surface coating of inorganic