机械制图国标（Mechanical drawing GB）.docVIP

机械制图国标（Mechanical drawing GB） Changes in the national standards of mechanical drawings 1., the history of the national standards of mechanical drawing Changing schedule of mechanical drawing standard in China Issue time, main content, Issue Department statement 13 engineering drawing standards for 1951. The financial committee of the Government Council used the first corner method as the unified rule of engineering graphics in China, thus reversing the chaotic state of the first and third directions in the mechanical drawings of our country. In 1956, 21 items of mechanical drawing were issued. The original first Ministry of machinery industry belongs to the former Soviet Union gamma OCT system. In 1959, the 19 national standards for mechanical drawings (the first set of GB). State Science and Technology Commission In 1970, a total of 7 items of national standards were revised in 1959, which were tried in the whole country. Chinese Academy of Sciences In 1974, it was expanded to 10 items on 1970, and was officially released. State Bureau of standards and measurement 17 national standards for mechanical drawing in 1983~1984 years. The former National Bureau of standards and measurement came into operation in 1985. This standard is followed by international standards (ISO), which reached the international advanced level at that time. 1993~2003 years, revised in 1985 the implementation of the mechanical drawing national standards. National Quality Supervision The vast majority of the inspection and Quarantine Bureau has been in line with international standards (ISO). In 1985, 17 of the 14 national standards for mechanical drawing were replaced. 2. a comparison of the old and new standards 1985 implementation of the standard and the current standard comparison table Classification of 1985 implementation of mechanical drawing national standard serial number, the current mechanical drawing National standard serial number mechanical drawing at present National standard nam