机械材料（Mechanical material）.docVIP

机械材料（Mechanical material） Chemical composition analysis of Aluminum Alloy casting and heat treatment principle of mechanical KV99.COM data share to QQ space Sina Baidu micro-blog micro-blog Tencent happy net friend Tencent Baidu space Douban Sohu micro-blog QQ and micro-blog Baidu new home of my Taobao Baidu Baidu share Post Bar more... Technical standard | | data | the | tool | bearing | material | save to desktop | favorte website - Current position: mechanical data KV99.COM - mechanical paper - Analysis of chemical composition and heat treatment of cast aluminum alloy. Discussion on chemical composition analysis and heat treatment principle of casting aluminum alloy (1) Al Si alloy, also called Si Al Ming or Si Al alloy. Good casting and wear resistance, small thermal expansion coefficient, the most varieties in the casting aluminum alloy, the largest amount of alloy, including silicon content in 10% ~ 25%. Sometimes add 0.2% ~ 0.6% magnesium silicon aluminum alloy, widely used in structural parts, such as shell, cylinder block, box and frame, etc.. Sometimes, adding proper amount of copper and magnesium can improve the mechanical properties and heat resistance of the alloy Of. Such alloys are widely used in the manufacture of pistons and other components. (2) Al Cu alloy, copper containing 4.5% ~ 5.3% alloy strengthening effect is the best, adding proper amount of manganese and titanium can significantly improve the room temperature, Gao Wenqiang Degree and casting properties. The utility model is mainly used for making sand castings with large dynamic and static loads and no complicated shapes. (3) aluminum magnesium alloy, the minimum density (2.55g/cm3), the highest strength (about 355MPa) of the casting aluminum alloy, containing 12% mg, strengthening Best effect. The alloy corrosion resistance in air and in the water, at room temperature with good mechanical properties and machinability, can be used as radar base, aircraft engine casing, propeller, landing