论太阳能无线充电器的设计与制造 电子电路设计与工艺专业毕业设计 毕业论文.docVIP

南京信息职业技术学院 毕业设计论文 作者 张晓光 学号 3081145 系部 微电子工程系 专业 电子电路设计与工艺 题目 论太阳能无线充电器的设计与制造 指导教师 孙凤梅 评阅教师 完成时间： 2011 年 06 月 15 日 论太阳能无线充电器的设计与制造 摘要：近年来通过用无线的技术来传送电能已经成为可能，并且已经有许多公司将这种技术应用于无线充电领域，而随着充电效率及充电电压的提高，有望在未来得到普及。但是无线充电在充电效率方面还是与有线充电有着一定的差距，因此造成的能源浪费无法避免。目前公认最为绿色的能源是太阳能，如果能够通过太阳能电池将能量接收并贮藏起来再对手机等电子产品的内置锂电池进行充电，这样既利用了太阳能达到了节能的作用，而且相对于市电的220V又多了几分安全。对于远距离无线传送电能需要的技术含量极高，但是无线充电电路对距离的要求较短，电路相对简单，所以将以上各部分电路集合在一单层PCB板或双层PCB板上进行批量生产是可行的。 关键词：无线充电电路 太阳能电池 太阳能充电电路 电路图 印制电路板 Title: Solar energy wireless battery chargers design and manufacture Abstract: To transmit electricity by using wireless technology has become possible in recent years, and many companies have applied the technology to wireless recharge areas. With the increasing of charging efficiency and charging voltage,it is expected to be popular in the future. But there is a certain gap between the wireless charging efficiency in charging and charging cable, the waste of energy can not be avoided. At present, more and more people recognize the most green energy is the solar energy. If we can receive the solar energy and store it to electronic products and so on handset built-in lithium batteries carries on again the charge, we will achieve the energy conservation function by using the solar energy. Moreover, it is security opposite to city electricity 220V . The technique content which needs regarding the long-distance range wireless transmission electrical energy is extremely high, but the wireless charging circuit is short to the distance request. The electric circuit is relatively simple. Therefore above various part of electric circuits will gather on a single-layer PCB board or the double-decked PCB board carry on the volume production will be feasible. Keywords: Wireless charging circuit Solar cell Sola