中国轧钢技术的发展现状和展望_王国栋.pdf

19 12 　 　Vol.19, No.12 2009 12　 　 China Metallurgy December　2009 王国栋, 　吴　迪, 　刘振宇, 　王昭东 (, , 110004) 　:, 。 、, 。 , 、、、、, 、、。 , , , 、 、, 、, 。 :;;;;;;;; :TG 3　　:A　　:1006-9356(2009)12-0001-14 Development and Prosperity of Steel Rolling Technology in China ANG Guo-dong, 　 U Di, 　LIU Zhen-yu, 　 ANG Zhao-dong (State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) Abstract:Since reforming and opening of China, the Chinese iron and steel industry got great progress.Now China has taken the position of the developed countriesin rolling technology by means of importing advanced technology, integration creation and self creation.The development and innovation in the field of hot strip, cold strip, plate, long products, tubesof Chinawere summarized in thispaper.It is pointed out that we must strengthen the technol- ogy modernization, solve the key technological problemslimiting the development of iron and steel industry, create the innovativeandleading-edge new technology, new equipment and new productfor saving energy and decreasing e- mission, realize the source-reduction manufacture, promote the sustainable development of iron and steel industry. Key words:rolling technology;hot strip;cold strip;plate;long products;tubes;technological modernization;key technology;source reduction , 、、。 1　中国轧钢技术的发展概况 , , , 21, 、、、、 , 、、 。, , 、、, 。 , 、 , ; , , 、、, 。, ; , , , , , , 、、, 。21, 、 “, , , 、 , ”, 。 、、 , , 、、, :(1942-), , , ;　　E-mail:wanggd@mail.neu.edu.cn;　　:2009-11-24 2