软件使用之——UG默认设置修改说明.docVIP

=================================GATEWAY================================ The parameters that affect the core UG system are specified in this section. These defaults all begin with the prefix UG. UG_objectWidth:thick !修改前normal Valid width options are: [thin, normal, thick] UG_csysColor:4 !修改前 Pre-V17 values were: blue (1), green (2), cyan (3), red (4), magenta (5),yellow (6), white (7), olive (8), pink (9), brown (10), orange (11), purple (12), dark-red (13), aquamarine (14), gray (15) ) UG_solidBodyColor:2 !修改前11 UG_solidBodyWidth:thick !修改前default UG_sheetBodyColor:7 !修改前6 UG_handlesColor:6 !修改前42 UG_drawingMonochromeDisplay:off !修改前on drawingMonochromeDisplay - This option allows the user to specify whether drawings should be displayed in full color mode or in monochrome mode. Default is on. UG_drawingSelectionColor:4 !修改前186 UG_drawingPreselectionColor:5 !修改前145 UG_drawingForegroundColor:4 !修改前216 UG_drawingBackgroundColor:216 !修改前7 UG_enableWebBackground:yes !新 Background Web On Windows only. By default, on UG startup, a central webpage will be accessed and displayed on the background. This webpage will contain the usual UG tips, plus any relevant information for that particular release. If you would like to disable this feature, either to display just the tips or to override that page with your own, simply set this flag to no. If there is no internet access or the pages are not available, the default tips page will be displayed. UG_showDrawingGrid:on !修改前off UG_showSketchGrid:on !修改前off UG_sketchGridLineEveryX_EU:5 !修改前4 UG_sketchGridLineEveryY_EU:5 !修改前4 UG_sketchGridEmphasisEveryX_MU:2.5 !修改前2 UG_sketchPolarGridEmphasis:off !修改前on UG_disableViewAnimation:on !修改前off Disable Smooth View Change - Controls the initial setting of general view animation playback for those functions which support view animation. UG_dashSize_MU:3.00 !修改前1.00 UG_textFiel