换热器熔焊成型生产流水线冷却系统的改造-暖通空调在线.PDFVIP

换热器熔焊成型生产流水线冷却系统的改造 王 瑾 陈 军 （上海理工大学城建学院上海 200093 ） 摘 要 根据某厂两条换热器生产流水线的现状和冷却降温的工艺要求，用 Airpark 软件进行数值模拟， 分析了冷却系统无法满足工艺要求的原因；运用传热学原理进行了设备与环境的传热理论分析和计算，分 析了冷却系统无法满足工艺要求的原因，得出了改造所需要的技术与结构参数，并对冷却系统进行合理布 局与气流组织，使新的冷却系统发挥了应有的作用，满足了生产工艺的要求，同时也减轻了生产环境的热 污染，提高了环境的空气品质。 关键词 冷却系统 传热计算 数值模拟 THE ALTERATION OF COOLING SYSTEM OF WELDING AND MOLDING PRODUCTION LINE FOR HEAT-EXCHANGER Wang Jin Chen Jun （College of Urban Construction Environmental Engineering, University of Shanghai for Science and Technology, Shanghai, 200093 ） Abstract According to the present situations of the two production lines and the temperature needed by the producing technics of the heat-exchanger , using the numerical simulation with the Airpark software to analyze the reason why the cooling system can not meet the technicals requirement; with the heat transfer theory computation based on the heat transfer principle, the technical parameters of the cooling sect refer to the system technic and configuration are obtained. That are made for reasonable organization of the airflow of the cooling system and the new cooling equipment achieving the technical requirement. At the same time, it will ease the thermal pollution of the circumjacent environment and improve IAQ of the workshop Keywords Cooling system; Heat transfer calculation; Numerical simulation 0 引言 车间内环境这两条生产线均未能达到预计的生产工 # 艺的要求，经过冷却后的产品温度远远高于50℃。 上海某汽车设备制造有限公司 104 车间的 4 和 # 7 两条生产流水线，是对所生产的车用空调蒸发器、 必须进行系统改造。 冷凝器等部件进行熔炉钎焊从焊炉流水线中出来的 铝合金产品与铁质托架夹具，其温度通常在