铝合金压铸技术和发展里程（Aluminum alloy die casting technology and development mileage）.docVIP

铝合金压铸技术和发展里程（Aluminum alloy die casting technology and development mileage） Since 1990s, Chinas die casting industry has made amazing progress and has grown into an emerging industry. At present, the aluminum alloy die casting technology has become one of the most widely used processes in the automotive aluminum alloy forming process, accounting for 49% of all kinds of automobile forming process. Chinese existing die casting enterprises 3000, die casting production increased from 266 thousand tons in 1995 to 870 thousand tons in 2005, the annual growth rate remained above 20%, which accounted for all of the above Aluminum Alloy die casting die casting production 3/4. The types of Chinas die casting products are diversified, including automobiles, motorcycles, communications, household appliances, hardware, power tools, IT, lighting, escalator steps, toy lamps and so on. With the improvement of technical level and product development ability, the types and application fields of die casting products are widening, and the die casting equipment, die casting mould and die casting technology have changed greatly. Die casting aluminum alloy die casting aluminum alloy has been commercialized since 1914. With the development of automobile industry and the invention of cold chamber die casting machine, it has been developed rapidly. Die-casting aluminum alloy according to performance is divided into medium and low strength (such as Chinas Y102) and high strength (such as Chinas Y112) two kinds. At present, the industrial application of die-casting aluminum alloy mainly has the following series: Al-Si, Al-Mg, Al-Si-Cu, Al-Si-Mg, Al-Si-Cu-Mg, Al-Zn and so on. Aluminum Alloy to improve the mechanical properties of die casting is often accompanied by reduced performance of the casting process, casting pressure because of the high pressure rapid solidification makes this kind of contradiction in some aspects more prominent, so the general casting difficult solution heat treatment,