小议j20几个争论焦点,并看这个项目对我国航空装备采购的重大影响中国（The J20 argument, and look at this project a great impact on Chinas aviation equipment procurement China）.docVIP

小议j20几个争论焦点,并看这个项目对我国航空装备采购的重大影响中国（The J20 argument, and look at this project a great impact on Chinas aviation equipment procurement China） Since the surrender of J20, many fans have paid close attention to it. Its appearance has greatly shortened the technological gap between China and the United States, greatly improved Chinas international status, and raised the confidence and national honor of the Chinese people. In my view I only have little talent and less learning, small talk argument J20 several notable. To discuss the deep talk, but welcome record retention. A. Invisibility It is often said that canard is a fatal damage to stealth, and infer J20 stealth performance is not good, and so on. But in fact, the performance of stealth is affected by many factors. Canard is not a fatal factor. On the radar reflection area, the angle reflection effect, the cavity reflection effect, the fast rotating object reflection random wave effect, the external influence and scattering effect all have great influence. J20 stealth design after the test and calculation model of large and complex, especially duck wing and wing it at the same level, and its belly is broad and flat, there is a reason for all this, and after a lot of test selection. If a few army fans can see through the naked eye, they know that the canard has great influence on stealth and invisibility, so the professional design institutes will not have to do it. My view: J20 front, side stealth performance reached four generations of aircraft in the upper and middle levels. Two. The design of the tail (especially the tail nozzle) is obviously not enough This is indeed no doubt whether the nozzle or caudal and pelvic fins are not conducive to stealth. But the big roll all moving tail is beneficial to stealth. The long flat tail nozzle adopting F22 is not only beneficial to the stealth of the backward radar, but also can be mixed evenly with a large amount of cold air flowing into the cooling air inlet and exhaust