显示频率（Display frequency）.docVIP

显示频率（Display frequency） Display frequency, amplitude adjustable, can produce four kinds of waveform, sine wave, square wave, sawtooth wave, triangle wave, I hope you can love, give you a piece of picture, love dont forget to take my answer. #includereg52.h #define uchar unsigned char #define uint unsigned int #define DAdata P0 //DA data port Sbit DA_S1= P2^0; / / the 8 bit input control register DAC0832, only when all is 0, can output data (in straight state), otherwise, the output will be latched Sbit DA_S2= P2^1; / / 8 DAC control register DAC0832 search, only when all is 0, can output data (in straight state), otherwise, the output will be latched Sbit key= P3^2; Uchar wavecount; //pumping count Uchar THtemp, TLtemp; / / intermediate frequency variable transmission Uchar judge=1; / / simple discriminant function in the square wave output function for Uchar waveform; / / when it is 0, 1, 2, on behalf of the three wave Uchar code freq_unit[3]={10,50200}; / / three wave frequency unit Uchar IData wavefreq[3]={1,1,1}; / / define an array element for each wave, the number of storage units for frequency Uchar, code, lcd_hang1[]={, Sine, Wave, Triangle, Wave, Square, Wave, Wave:, press, No.1, key, Select,}; Uchar IData lcd_hang2[16]={f= Hz}; Uchar code waveTH[]={ 0xfd, 0xFE, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xFE, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xf6,0xf9,0xfb, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfe}; Uchar code waveTL[]={ 0x06,0x8a, 0x10,0x4e, 0x78,0x93,0xa8,0xb3,0xbe, 0xc6, middle / sine wave frequency adjustment value 0xac, 0xde, 0x48,0x7a, 0x99,0xaf, 0xbb, 0xc8,0xd0,0xde, / / intermediate frequency of triangular wave adjustment value 0x88,0x50,0x90,0x32,0x34,0xbe, 0x4a, 0xa3,0xe5,0x2c}; /*************************************************************************************************/ Uchar code triangle_tab[]={/ / every number 8, take a 0x00,0x08,0x10,0x18,0x20,0x28,0x30,0x38,0x40,0x48,0x50,0x58,0x60,0x68,0x70,0x78, 0x80,0x88,0