韶山4（Shaoshan 4）.docVIP

韶山4（Shaoshan 4） Remarks 1., the information, rules, questions in the answer annotated sources, such as: J27 says the question comes from (twenty-seventh); C66 says the question comes from (sixty-sixth rules); Y18 says the question comes out of eighteenth; S-P36 says the title is from the thirty-sixth page of the book of events The 2. general knowledge questions indicating the source in the answer, such as to fill in the blanks answer the first question of outside calipers, in the outside calipers three characters after the marked P5 said the problem (from the locomotive crew general knowledge page fifth and so on. (a) fill in the blanks 1. the main function of the electric part of electric locomotive is to change the electric energy from the contact wire into the mechanical energy (P1) required by the traction train, realize the energy conversion, and realize the locomotive control at the same time. 2. the main circuit breaker drive cylinder function is: receive (delay valve P40) or starting valve from the compressed air, drive its piston action, in order to complete the disconnecting switch closed or closed. 3. the function of the air pipe system of electric locomotive is to produce compressed air for all kinds of pneumatic equipment on the locomotive, and realize the P1 of locomotive and train (air brake). There are 4 roof covers of 4.SS4 modified electric locomotive, which are located in the transformer room (P2), the mechanical room, and the upper chamber of the I and II terminals. 5. wheels and axles are called wheelset. The wheelset of an electric locomotive should also include (transmission gear P5). 6. of the locomotive wheel tyre and rim can be divided into (tread P5). 7., when the locomotive passes through the rail joint, the switch and other uneven line (shock, vibration, P6), the spring device can ease the impact of rail on the locomotive. The traction motor of 8.SS4 modified electric locomotive is mounted on the bogie frame by means of axle support type