柴油发电机的使用维护与管理及故障检修（Operation, maintenance and management of diesel generator and troubleshooting）.docVIP

柴油发电机的使用维护与管理及故障检修（Operation, maintenance and management of diesel generator and troubleshooting） I. The use of diesel generators (1) starting of diesel generator sets; In order to obtain the maximum safety and life of the unit, regular maintenance is essential, if strictly abide by the relevant regulations of unit maintenance, it can guarantee the performance of the unit and avoid damaging the environment. The correct identification and strict compliance with the marking (graphics, letters, warnings, etc.) on the diesel generator set are of great help to the correctness of maintenance and the safety of operation and use. When maintaining the unit, it must be carried out under the stop, and the negative cable of the battery should be removed to ensure that the unit will not start mistakenly. 1. Check before starting Check the oil level; check the coolant level; Three functions: We provide sufficient heat transfer capacity The prevention of all metal corrosion in the cooling system We provide enough anti freezing capability The cooling liquid should be composed by water and antifreeze or water and antirust liquid mixing, the pH of the water should be between 6~8, usually suggested the use of pure water, in the frozen area, cooling liquid should be antifreeze containing 40~60%, such ability in -30 deg.c antifreeze. Check the air filter clogging indicator; discharge, check the air in the low pressure oil radiator with external ventilation; check the engine drive belt; check the fuel supply line and battery check; starting system; control cabinet internal wiring of turbine generator brush inspection inspection. 2, diesel generator set start Winter start preparation: 1) ensure good oil supply 2) ensure the capacity and voltage of the battery Such as: 135 series diesel generator sets generally use 6Q-195 batteries, in winter for more than 6Q-210 12V batteries. 3) artificial turning on diesel engine 4) start and decompress the intake and exhaust doors 5) heating the coolin